Filter
Top Products
Connections
12
Connections
Make sure the handset cord
goes into the socket marked
with a handset symbol on
the side of the machine!
Use the handset to make ordinary
phone calls, or to transmit and
receive documents manually.
Power lead
Plug the power lead into a 230-240 V,
50 Hz, earthed (3-prong) AC outlet.
Caution:
When disconnecting the fax, unplug
the telephone line cord before
unplugging the power lead.
Caution:
The mains outlet (socket outlet)
should be installed near the
equipment and be easily accessable.
The machine does not have
a power on/off switch, so
the power is turned on and
off by simply plugging or
unplugging the power lead.
Note: If your area experiences a high
incidence of lightning or power
surges, we recommend that you
install surge protectors for the power
and telephone lines. Surge protectors
can be purchased at most telephone
specialty stores.
Handset
Connect the handset as shown and
place it on the handset rest.
♦
The ends of the handset lead are
identical, so they will go into either
socket.
all_fo781a.book Page 12 Thursday, January 11, 2001 12:06 PM