Filter
Top Products
Polling (Requesting a Fax Transmission)
72
Polling (Requesting a Fax Transmission)
Polling allows you to call another fax machine and have it send a document
(previously loaded in its feeder) to your machine without operator assistance. In
other words, the receiving fax machine, not the transmitting fax machine, initiates
the transmission. You can use your machine to both poll and be polled by others.
To use the polling function, you must first set Rapid Key 08/POLL for use as a
polling key. This is done by changing Option Setting 14, as described in Chapter 8,
Option Settings. (Note that when Rapid Key 08/POLL is set as a polling key, it
cannot be used for Rapid Key Dialling.)
Requesting transmission
1
Dial the fax machine you want to
poll using one of the following
methods:
•
Pick up the handset (or press the
SPEAKER key) and press a Rapid
key. Wait for the fax answerback
tone.
•
Pick up the handset (or press the
SPEAKER key) and dial the full
number. Wait for the fax
answerback tone.
•
Press the SPEED DIAL key and
enter a 2-digit Speed Dial number.
•
Enter the full number using the
numeric keys.
2
5
8
GHI
JKL
MNO
TUV
WXYZ
PQRS
ABC
DEF
1
4
7
3
6
9
(Example)
2
Press Rapid Key 08/POLL.
•
If you used the handset, replace it
when POLLING appears in the
display. Reception will begin.
08/POLL
Being polled (polling
standby)
To let another fax machine poll your
machine, simply set the reception
mode to FAX, and load the
document(s) to be sent.
Transmission will take place when
the other fax machine calls your
machine and activates polling.
Automatic reception is possible whilst
your fax is on polling standby.
all_fo781a.book Page 72 Thursday, January 11, 2001 12:06 PM