Filter
Top Products
Using TEL Mode
49
3. Receiving
Documents
2 in 1 Print
To save paper, you can have the size
of your incoming faxes reduced by
55%. This will allow you to receive, for
example, a 2-page document on one
page (note that this may not be
possible if the document pages are
longer than your printing paper). To
turn on this function, follow the steps
below.
1
Press these keys:
2
Press 1 to turn on the function, or 2
to turn it off.
2 IN 1 PRINT
FUNCTION
Press 3
times
6
1 2
or
YES NO
3
Press the STOP key.
STOP
Reception Ratio
The fax has been set at the factory to
automatically reduce the size of
received documents to fit the size of
the printing paper. This ensures that
data on the edges of the document
are not cut off. If desired, you can
turn this function off and have
received documents printed at full
size.
Note: If a document is too long to fit
on the printing paper, the remainder
will be printed on a second page. In
this case, the cut-off point may occur
in the middle of a line.
Note: Automatic reduction may not
be possible if the received document
is too large, contains too many fine
graphics or images, or is sent at high
resolution. In this case, the remainder
of the document will be printed on a
second page.
1
Press these keys:
RECEPTION RATIO
FUNCTION
Press
twice
6
PRINT CONTRAST
all_fo781a.book Page 49 Thursday, January 11, 2001 12:06 PM