Filter
Top Products
Maintenance
89
10. Maintenance
8
Reinsert the paper in the paper tray
and push the paper release plate
back down.
Document
rollers
Scanning glass
Caution!
♦
When wiping, take care not to
damage any of the protruding parts
on the underside of the operation
panel.
The housing
Wipe the external parts and surface
of the machine with a dry cloth.
Caution!
♦
Do not use benzene or thinner.
These solvents may damage or
discolor the machine.
Scanning glass and rollers
Clean the scanning glass and rollers
frequently to ensure the quality of
transmitted images and copies. Open
the operation panel (grasp the finger
hold and pull up), and wipe the
scanning glass and rollers with a soft
cloth.
♦
Make sure that all dirt and stains
(such as correcting fluid) are
removed, as dirt and stains will
cause vertical lines on transmitted
images and copies. If necessary,
use a cloth moistened with
isopropyl alcohol.
♦
Adhesive cellophane tape is useful
for removal of debris from the
rollers.
all_fo781a.book Page 89 Thursday, January 11, 2001 12:06 PM