Filter
Top Products
Using TEL Mode
48
Answering with an extension
phone
1
Answer the extension phone when
it rings.
2
If you hear a fax tone when you
answer the extension phone, wait
until your fax answers (the
extension phone will go dead), and
then hang up.
Phone goes dead
Beep
3
If the fax doesn't respond, or if the
other party first talks to you and
then wants to send a fax, press 5,
*, and * on the extension phone
(only on a tone dial phone). This
signals the fax to begin reception.
Hang up.
5
Comments:
♦
Your fax will not accept the signal
to begin reception (5**) if a
document is loaded in its feeder.
♦
If you have set Option Setting 12 to
NO and hear a fax tone when you
answer the extension phone, you
must press 5, *, and * if you are
on a tone dial phone, or walk over
to the fax, pick up the handset, and
press the START/MEMORY key if
you are on a pulse dial only phone.
♦
In New Zealand, not all standard
telephones and answering
machines will respond to incoming
ringing when connected to the
socket of the equipment.
all_fo781a.book Page 48 Thursday, January 11, 2001 12:06 PM