Filter
Top Products
Timer Operations
75
7. Special
Functions
Timer Operations
The Timer function allows you to set a transmission and/or polling operation to be
performed automatically at a time you specify. One transmission operation and one
polling operation can be set at the same time, and the times they will be performed
can be specified up to 24 hours in advance.
As an example, you can use this function to take advantage of off-peak telephone
rates without having to be there when the operation is performed.
Note: Only a Speed Dial number can be used to dial the receiving machine.
Setting a timer operation
1
Press these keys:
2
Press # to set a transmission
operation (SEND MODE), or * to
set a polling operation (POLLING
MODE).
1
TIMER MODE
3
Press 1 to select SET.
0 59 2
Example: 9:25
4
Enter the time at which you want
the operation to take place in 24-
hour format (2 digits for the hour
and 2 digits for the minute).
FUNCTION
1
or
5
Press the START/MEMORY key.
START/MEMORY
6
Enter the Speed Dial number of the
receiving fax machine.
•
If this is a polling operation, go to
Step 9.
0 5
(Example)
START/MEMORY
7
Press the START/MEMORY key.
all_fo781a.book Page 75 Thursday, January 11, 2001 12:06 PM