Sharp FO-781 Fax Machine User Manual


 
Caller ID
62
3
Enter the phone number, including
the area code, by pressing the
number keys (max. of 20 digits).
4
Press the START/MEMORY key
and then the STOP key.
2
5
8
GHI
JKL
MNO
TUV
WXYZ
PQRS
ABC
DEF
1
4
7
3
6
9
START/MEMORY
STOP
Blocking voice calls
With Caller ID turned on, you can use
the Anti Junk Fax function described
in Blocking Reception of Unwanted
Faxes in this chapter to prevent voice
calls as well as fax receptions (the
Anti Junk Fax function can normally
only prevent faxes).
In this case when a voice call or a fax
transmission comes in from a number
you have specified as a "Junk
Number", your fax will terminate the
call as soon as it receives the calling
phone number from the caller ID
service. The caller will hear a 3
second high pitch tone to signal the
calls termination. In Australia the call
will not break off until the caller has
hung up.
To use this function, set Option
Setting 13 to YES as described in
Chapter 8, Option Settings, and then
enter the number in the Anti Junk
Number List as explained in Blocking
Reception of Unwanted Faxes in this
chapter.
Note: This function cannot be used if
you are using Distinctive Ring.
all_fo781a.book Page 62 Thursday, January 11, 2001 12:06 PM