Filter
Top Products
Messages and Signals
96
LINE IS IN USE An extension phone connected to the fax is being used.
Do not lift the fax's handset or attempt transmission at
this time, as this will interrupt the conversation on the
extension phone.
MEMORY IS FULL The memory is full. This may occur during fax reception
if too much data is received before the pages can be
printed out. If faxes have been received to memory
because printing is not possible (an additional message
will indicate the problem), resolve the problem so that
printing can continue (see Substitute Reception to
Memory in Chapter 3). If you are attempting to transmit
from memory, see Sending Documents from Memory in
Chapter 7.
MEMORY PRINTING The fax is preparing or printing out a document from
memory.
NO DATA This appears if you attempt to search for an automatic
dialling number when none have been stored.
NO # STORED You have tried to dial or clear a Rapid Key or Speed Dial
number that hasn't been programmed (a full number
hasn't been assigned to it).
OUT OF PAPER You are out of printing paper (or the paper release plate
is open). Load paper as described in Loading Printing
Paper in Chapter 1.
ON HOOK DIAL The SPEAKER key has been pressed and the fax is
waiting for you to dial. (To return to the date and time
display, press the SPEAKER key again.)
OVER HEAT The print head has overheated. Operation may be
continued once it cools.
PAPER JAMMED The printing paper is jammed. See the following section,
Clearing Paper Jams.
READY TO SEND A document has been loaded and the fax is waiting for
transmission or copying instructions.
all_fo781a.book Page 96 Thursday, January 11, 2001 12:06 PM