Filter
Top Products
Option Settings
79
8. Option
Setting
Setting 6: TRANSACTION REPORT PRINT SELECT
This sets the condition for printing out a Transaction Report. Enter a number from 1
to 5 as follows:
♦
Initial setting: 5
1 (ALWAYS PRINT): A report will be printed after each transmission,
reception, or error.
2 (ERR/TIMER/MEM): A report will be printed after an error, timer
operation, or memory operation.
3 (SEND ONLY): A report will be printed only after a transmission.
4 (NEVER PRINT): A report will never be printed.
5 (ERROR ONLY): A report will be printed only after an error occurs.
TRANSACTION LIST
until display
shows:
Press
4
FUNCTION
DIAL MODE
Enter a number
from 1 to 5
STOP
Setting 7: DIAL MODE
This sets the mode of dialling. Press 1 if you are on a tone dial line, or 2 if you are on
a pulse dial line.
♦
Initial setting: 1
PSEUDO RING DUR.
or
1 2
TONE PULSE
STOP
DIAL MODE
until display
shows:
Press
4
FUNCTION
Note: For all units installed in New Zealand, select "1" for tone dialling. The pulse
setting "2" will not operate correctly and must not be used.
all_fo781a.book Page 79 Thursday, January 11, 2001 12:06 PM