Sharp FODC525 All in One Printer User Manual


 
Installing the Network Scanner Software
101
3. Network
Scanner
2
Enter any name you wish for the Process Definition Prefix and any letter for
Initial, and click Next. The prefix is used in the name that is assigned to the
Process Definitions you will select in step 3, and in the name of the Rapid Key
or Speed Dial number that is assigned to each selected process.
The name of your computer initially appears in the Prefix box. If you wish to
change the prefix, enter a name in 6 characters.
Enter any letter for the Initial (the initial is not used on the FO-DC500/525/
600, however, an entry is necessary).
3
Select the Process Definitions that you wish to use and click Next. Each
process that you select will be assigned a Rapid Key or Speed Dial number on
the machine.
Network Scanner Tool is shipped with 3 pre-defined sets of instructions
called Process Definitions if you install both Sharpdesk and Network
Scanner Tool. The “Process Definition Prefix” that was set in Step 2
appears in the name of each process (“Sharp” is used for the prefix in the
examples below).
all.book Page 101 Thursday, May 13, 2004 8:51 AM