Sharp FODC525 All in One Printer User Manual


 
Transmittable Documents
33
2. Send/Receive
Documents
Maximum scanning area
The area of the document that the machine can scan is slightly smaller than
the actual document size. Any letters or graphics outside this area will not be
scanned.
Maximum scanning width: 10 inches (256 mm)
Maximum scanning length: The length of the document minus 0.16
inches (4 mm) from the top and bottom of
the document.
Other restrictions
The scanner cannot recognize yellow, greenish yellow, or light blue ink.
Ink, glue, and correcting fluid on documents must be dry before they pass
through the document feeder.
All clips, staples, and pins must be removed from documents before loading
in the feeder. If these are not removed, they may damage the machine.
Documents which are patched, taped, torn, smaller than the minimum size,
carbon backed, easily smudged, or have a slick, coated surface should be
photocopied, and the copy loaded in the feeder.
all.book Page 33 Thursday, May 13, 2004 8:51 AM