Sharp FODC525 All in One Printer User Manual


 
Dual-line Option (FO-DC600 only)
67
2. Send/Receive
Documents
Dual-line Option (FO-DC600 only)
The dual line option (FO-60DL) allows your machine to be connected to a
second telephone line. If you wish to use this option, consult your dealer to
have the dual line kit installed. The dual-line option is only available on the
FO-DC600.
Note: The FO-60DL dual line option and the FO-NP1 network printer option
cannot both be installed on the same machine.
After your dealer installs the dual line kit, connect your second phone line to
the LINE 2 jack.
Caution: Do not insert the line into the port on the LAN board (if installed).
This will damage the LAN board.
Manual fax transmission (Normal Dialing using the SPEAKER key or an
extension phone connected to the machine) and manual fax reception are
only possible on Line 1. An extension phone connected to the machine
uses Line 1.
The machine will only ring when a call is received on Line 1. When a call is
received on Line 2, the FAX 2 indicator will blink.
Entering your name and fax numbers
If you have the dual-line option, use the following procedure to enter your
name (only one name can be entered) and the fax number of each line. This
information will appear at the top of each fax page you send.
1
Press and then or
until ENTRY MODE is selected in the
display.
MENU
Display:
MENU MODE
1:RECEIVE MODE
2:LISTING MODE
3:ENTRY MODE
LINE 2
all.book Page 67 Thursday, May 13, 2004 8:51 AM