Sharp UX-B800SE All in One Printer User Manual


 
50
8. Printing Lists
You can print lists showing settings and
information entered in the machine.
1 Press , then until
[
LISTING MODE] appears.
2 Press .
3 Press or until the
desired list (see below) appears.
ACTIVITY LIST: This report shows
information on your most recent
transmissions and receptions
(combined maximum of 30). The
headings are the same as in the
Transaction Report (see the next
section). The logged transactions are
erased after the report is printed. To
have the report print automatically
whenever the number of logged
transactions reaches 30, see page
45 and “AUTO PRINT OUT” on page
47.
DESTINATION LIST: This shows
the fax and e-mail destinations that
have been stored in Rapid Key and
Speed Dial numbers (pp. 19 and 27).
FUNCTION
GROUP LIST: This shows the
destinations that are stored in the
Group Keys (p. 36).
SETUP LIST: This shows your
currently entered sender’s name,
sender’s number, and anti-junk fax
number, your current selections for
the option settings, print setup, and
receive faxes to e-mail, and a
sample of the header printed at the
top of every fax page you transmit
(HEADER PRINT).
CALLER-ID LIST: This shows
information on your 30 most recently
received calls and faxes (p. 38).
(This list is only available if you are
using the Caller ID function.)
RECEIVE FAX TO E-MAIL LIST:
This shows the Receive Fax to E-
mail settings that have been stored
(page 41).
NETWORK SETTING LIST: This
shows the machine’s current IP
address and other network/Internet
settings (page 23).
4 Press to print the list.