Filter
Top Products
Messages and Signals
60
INK NEAR EMPTY The cartridge is nearly empty (approximately one eighth
of the ink remains).
LINE ERROR Transmission or reception was not successful. Press
to clear the message and then try again. If the error
persists, see Line error on page 56.
LOW INK The cartridge is low on ink (approximately one quarter
of the ink remains).
MEMORY FULL If faxes have been received to memory because printing
is not possible, resolve the problem so that printing can
continue (see Reception to Memory on page 33).
If faxes are being held in memory because the Secure
Receive function has been activated, print the faxes as
explained on page 43.
If you are attempting to broadcast or transmit from
memory, see If the memory becomes full on page 36.
If you are copying, see If MEMORY FULL appears on
page 34.
OUT OF INK The cartridge is out of ink and must be replaced. Faxes
will be received to memory.
PAPER JAMMED The printing paper is jammed. See page 62.
PRINTER ERROR A printer error has occurred. Open the cover, make sure
the print cartridge is installed correctly, and then close
the cover.
PRINTER ERROR/
CHECK PAPER
A paper jam may have occurred. Follow the procedure
on page 62 to clear the jam.
RECALLING This appears if you attempt to send a fax by auto dialing
and the line is busy or the receiving fax machine does
not answer. Your machine will automatically reattempt
the call. (See Automatic redialing on page 30.)
RECEIVED SECURE FAX A received fax is being held in memory because the
Secure Receive function has been activated. Enter your
secure code to print the fax (see page 43).
STOP