Sharp UX-BS60 Copier User Manual


 
Caller ID (Requires Subscription to Service)
100
How Caller ID operates
When you receive a call, the name and phone number of the caller will appear
in the display, beginning just before the first ring. The information will continue
to be displayed until the line is disconnected.
Note: Some caller ID services may not provide the name of the caller. In this
case, only the phone number will appear.
Display messages
One of the following messages will appear while the fax rings if caller
information is not available.
NO SERVICE No caller information was received from your telephone
company. Make sure that the telephone company has
activated your service. This message will also appear
instead of Caller ID information if a call comes in while
you are recording an OGM or memo, or are playing
back recorded messages. If the call happens to be
from your SMS center, SMS message reception will not
be possible at this time.
CALLER-ID ERROR Noise on the telephone line prevented reception of
caller information.
OUT OF AREA The call was made from an area which does not have a
caller identification service, or the caller’s service is not
compatible with that of your local phone company.
WITHHELD Caller information was not provided by the telephone
company at the caller’s request.
Display example
5258693
JOHN DOE
Caller’s number
Caller’s name
all.book Page 100 Tuesday, March 29, 2005 9:08 AM