Optional Answering Machine Settings
53
3. Answering
Machine
1
Press once and once.
2
Press once and once.
3
Press .
4
Press a number from 1 to 4 to select the desired ICM recording time
.
5
Press to return to the date and time display.
15 seconds 60 seconds
30 seconds 4 minutes
Optional Answering Machine Settings
Setting ICM time
Incoming messages (ICMs) are the messages which callers leave for you on
the built-in answering machine. The answering machine is set at the factory to
allow each caller a maximum of 4 minutes to leave a message. If desired, you
can change this setting to 15, 30, or 60 seconds.
Display:
The display briefly shows
your selection, then:
FAX mode on A.M. failure
If the memory for recording incoming messages becomes full while you are
out, the answering machine will no longer be able to record messages. The
ON A.M. FAILURE setting is used to choose the response of the machine to
incoming calls when this happens:
♦ YES (switch to FAX mode): The reception mode will switch to FAX mode,
allowing the machine to continue to receive faxes automatically. With this
setting, you can still use the remote commands to listen to your messages
and then erase them (see
Remote Operations
on page 60).
A.M. SETTING
RECORDING TIME
REMOTE CODE
RECORDING TIME
1=15 SECONDS
all.book Page 53 Tuesday, March 29, 2005 9:08 AM
