Filter
Top Products
Optional Answering Machine Settings
54
1
Press once and once.
2
Press once and twice.
3
Press .
4
Press to select YES (switch to
FAX mode), or to select NO.
5
Press to return to the date and time display.
♦ NO (do not switch to FAX mode): The machine will answer after 19 rings,
after which it will wait to receive a remote command. Most callers will hang
up before it answers; however, when you call the machine from a remote
location, you can wait until it answers, listen to your messages, and then
erase them (see
Remote Operations
on page 60).
The initial setting is NO. If you want to change the setting to YES, press the
panel keys as follows:
OGM only mode
If needed, you can turn off recording of incoming messages. In this case, your
outgoing message will play, but callers will not be able to leave a message.
(The machine will still receive faxes sent by automatic dialling.)
1
Press once and once.
2
Press once and once.
The display briefly shows
your selection, then:
Display:
A.M. SETTING
ON A.M.FAILURE
ON A.M.FAILURE
1=YES, 2=NO
OGM ONLY MODE
Display:
A.M. SETTING
OGM ONLY MODE
all.book Page 54 Tuesday, March 29, 2005 9:08 AM