Filter
Top Products
Sending an SMS Message
38
7
When you are ready to send the message, press . The fax machine
will automatically call your SMS center and send the message.
• After the message is sent, it is placed in the outbox. If the message was not
sent successfully, the fax machine will make 3 attempts at 5-minute
intervals to resend the message (see page 80), and an exclamation point (!)
will appear with the message when you view it in the outbox (see page 43).
No exclamation point will appear if the message was sent successfully.
START/
MEMORY
Sending an SMS message using an auto-dial number
If the number of the recipient has been stored as an auto-dial number, you
can use the auto-dial number to send an SMS message.
♦ The procedure for storing auto-dial numbers is explained on page 73.
1
Press once and twice.
• Note: If you have an unread received message, the message will appear
when you press . Read the message first (see page 41) and then
perform this procedure.
2
Press once and once.
3
Press .
4
Press (or ) until the desired recipient appears in the display (if no
name was stored, the number will appear).
Important: The stored number must include the area code.
Your first auto-dial
number appears here
Display:
ENTER #
AAA
WRITE MESSAGE
ENTER #
AUTO DIAL
all.book Page 38 Tuesday, March 29, 2005 9:08 AM