Filter
Top Products
Sending a Fax From Memory
84
Sending a Fax From Memory
You can scan a document into the fax’s memory and send the document from
memory. This increases transmission speed and allows you to send a fax to
multiple destinations in a single operation. After transmission, the document is
automatically cleared from memory.
Note: If a power failure occurs while sending a fax from memory, you will need
to repeat the operation.
Broadcasting (sending a fax to multiple destinations)
This function allows you to send the same fax to as many as 20 different
destinations in just one operation.
♦ When sending to multiple destinations, only auto-dial numbers can be used
to dial the numbers of the receiving machines.
1
Load the document(s).
• If desired, press to set the
resolution and/or contrast.
2
Press .
3
Press or until the name of the destination appears in the display
(if no name was stored, the number will appear).
4
Press to store the destination.
RESOLUTION/
RECEPTION
START/
MEMORY
29-MAY 12:00
READY TO SEND
all.book Page 84 Tuesday, March 29, 2005 9:08 AM