Support User Manuals

Sierra Raven EDGE Network Card User Manual

Open as PDF

of 141

Raven EDGE

99 20070914

• n=0:SNMPisdisabled.

• n=1‐65535

*SNMPSECLVL=n

SelectsthesecuritylevelrequirementsforSNMPcommunica‐

tions.

• n=0:Nosecurityrequired.SNMPv2candSNMPv3

communicationsareallowed.

• n=1:Authenticationequivalentto“authNoPriv”settingin

SNMPv3.SNMPv3isrequiredtodoauthentication,

SNMPv2ctransmissionswillbesilentlydiscarded.

• n=2:Authenticationandencryption,equivalentto

“authPriv”ʹsettinginSNMPv3.SNMPv3isrequiredtodo

authenticationandencryption,SNMPv2candSNMPv3

authNoPrivtransmissionswillbesilentlydiscarded.

Messagesarebothauthenticatedandencryptedtoprevent

ahackerfromviewingitscontents.

*SNMPTRAPDEST=host/[port]

ControlsdestinationforSNMPTrapmessages.Ifportis0or

hostisempty,trapsaredisabled.Trapsaresentoutaccording

totheSNMPsecuritylevel(i.e.ifthesecuritylevelis2,traps

willbeauthenticatedandencrypted).Currently,theonlytrap

thatcanbegeneratedislinkup.

• host=IPaddress

• port=TCPport

*SNTP=n

EnablesdailySNTPupdateofthesystemtime.

• n=0:Off

• n=1:On

*SNTPADDR=[d.d.d.d][name]

SNTPServerIPaddress,orfully‐qualifieddomainname, to

useif*SNTP=1.Ifblank,time.nist.govisused.

• d.d.d.d=IPaddress

• name=domainname

*TELNETTIMEOUT=n

Telnetportinactivitytimeout.Bydefault,thisvalueissetto

closetheATtelnetconnectionifnodataisreceivedfor2

minutes.

• n=minutes

previous next