Support User Manuals

Sierra Raven EDGE Network Card User Manual

Open as PDF

of 141

Configuration Commands

Rev 3.0B Feb.08 100

*TPORT=n

Setsorqueriestheportusedfor theATTelnetserver.If0is

specified,theATTelnetserverwillbedisabled.Thedefault

valueis2332.

• n=0:Disabled.

• n=1‐65535

Tip: Many networks have the ports below 1024 blocked. It is recom-

mended to use a higher numbered port.

*TQUIT

Disconnectsthetelnetsession.NotavailableinAceManager..

Friends

FriendsModecanlimitaccesstotheRavenfromthecellular

networkandtheInternet.Friendsmodeisabasicfirewall.

Caution: If you are using Friends Mode you will not be able to use

AceManager remotely or Telnet to the modem unless you are

contacting the modem from one of the configured IP addresses.

Note: Friends Mode will only prevent the Raven modem from

receiving data from those IP addresses not on the Friends List. It

cannot prevent data, such as pings, from traversing the network to the

modem which may billable traffic even though the modem does not

receive the data.

Figure 1-10: AceManager : Friends

previous next