Support User Manuals

Sierra Raven EDGE Network Card User Manual

Open as PDF

of 141

Configuration Commands

Rev 3.0B Feb.08 80

Information Displayed in AceManager

without AT Commands Listed

• VersionsofALEOS,internalhardware,boot,andMSCI:

Versionsofinternallyconfiguredhardwareandsoftware.

Status

Mostofthecommandsinthe“Status”grouphaveread‐only

parametersandprovideinformationaboutthemodem.The

StatusGrouphasmorefieldsthatcanbedisplayedonmost

screens.Youcaneitherresizeyourwindoworusethescroll

baronthesidetodisplaytheremainder.

Figure 1-2: AceManager : Status

*HOSTMODE?

Thecurrenthostmode(AT,PPP,UDP,etc.).IftheRavenisnot

inATmode,telnetintothemodemtoexecutethiscommand.

*NETERR?

TheEDGEorGPRSnetworkbiterrorrate.

*NETIP?

Note: If there is no current

network IP address, 0.0.0.0 may

be displayed.

ThecurrentIPaddressofthemodemreportedbytheinternal

module,generallyobtainedfromyourcellularprovider.This

istheaddresscancontacttheRavenfromtheInternet.

previous next