Support User Manuals

Sierra Raven EDGE Network Card User Manual

Open as PDF

of 141

Configuration Commands

Rev 3.0B Feb.08 94

*PTINIT=string

AnyATCommandstringtobepassedtotheOEMmodule

beforeenteringPASSTHRUmode,e.g.AT&S1V1,etc.

• string=ATcommand(s)

*PTREFRESH=n

NumberofminutesofinactivityinPASSTHRUmodeto

resendthe*PTINITstringtothehardwaremodule.

• n=0:Disabled

• n=1‐255minutes

*RESETPERIOD=n

InPASSTHRUmode,modemwillberesetafterthisperiodif

nodatahasbeensentorreceived.Valueisinhours.

• n=0:Disabled

• n=1‐255hours

SMTP

SMTP(SimpleMailTransferProtocol)isthedefactostandard

foremailtransmissionacrosstheInternet.TheRavencansend

messagesusingSMTPifithasbeenconfiguredtouseamail

server.

Note: You cannot send an Email with your Raven unless the Email

server you have configured allows your Raven as a relay host. Talk to

your network administrator to ensure you can send email through the

email server using your Raven.

SMS(ShortMessageService)isanotherwaytosendmessages

viathecellularnetwork.MostSMScommandsrequirethe

modemtobeinPassThrumode.

Note: SMS may not be supported by your account with your cellular

carrier.

previous next