Support User Manuals

Sierra Raven EDGE Network Card User Manual

Open as PDF

of 141

Configuration Commands

Rev 3.0B Feb.08 106

Figure 1-14: AceManager : EDGE/HSDPA

*NETAPN=apn

EasyentryoftheAPN.Ifleftblank,themodemwillattemptto

usethedefaultsubscribervalueasdefinedbytheaccount.

• apn=accesspointname

+CGQMIN

MinimumAcceptableQualityofServiceProfile.Change

shouldbeatcarrierʹsrequest.Normallynotrequiredtobe

changed.

+CGQREQ

SetQualityofServiceProfile.Changeshouldbeatcarrierʹs

request.Normallynotrequiredtobechanged.

+COPS=mode,[format][,oper]

Manuallyspecifyanoperator.Referalsoto*NETOP.

• mode=0:Automatic‐anyaffiliatedcarrier[default].

• mode=1:Manual‐useonlytheoperator<oper>specified.

• mode=4:Manual/Automatic‐ifmanualselectionfails,

goestoautomaticmode.

• format=0:Alphanumeric(ʺnameʺ)(G3x10mustusethis

format).

• format=2:Numeric

• oper=”name”

previous next