Filter
Top Products
Control panel II
This menu enables you to manage the 3D features, USB source control, audio features and
interactive features.
Submenu setting Description
3D on/off Turns the DLP Link technology 3D feature on or off.
3D invert Selects the 3D Invert setting (L R or R L).
3D format Displays the current 3D format (Interleaved or Under-over).
USB1 source N/A
USB 2 source N/A
Line volume Adjusts the projector’s line-input volume amplification from
-20 to 20.
Microphone volume Adjusts the projector’s microphone volume amplification
from 0 to 40.
Mic attenuation Enables or disables attenuation of the microphone input.
System mute Mutes the projector’s audio output.
Microphone mute Mutes the microphone output.
Microphone output switch Set output to Line out + speaker, Line out or Speaker.
System output switch Set output to Line out + speaker, Line out or Speaker.
Volume control Adjusts the volume control.
Interactive Turns interactive features on or off.
Channel Auto allows the projector to automatically select the best
radio frequency (RF) channel. Manual lets you select a
channel within the 2.4 GHz band.
Channel information Displays the RF channel that the projector is using and
allows you to set it.
System functionality Allows you to set the interaction mode to Presenter or
Whiteboard.
Network settings
This menu allows you to use or not use Dynamic Host Control Protocol (DHCP) and to set the
network-related addresses and names when DHCP is not used.
Submenu setting Description
DHCP Determines if the projector’s IPaddress and other network settings
are dynamically assigned by a DHCPserver or manually set.
l
On allows the network’s DHCP server to assign a dynamic IP
address to the projector.
l
Off allows you to manually set the projector’s IP address and
other network settings.
C H AP T ER 7
Remotelymanaging your interactive projector
57