Filter
Top Products
Command Command target range Response
get micvolume [target] micvolume=[current] No
set micvolumecontrol[target] micvolumecontrol=[current] No
get micvolumecontrol micvolumecontrol=[current] No
set sysoutputsw[target] sysoutputsw =[current] No
get sysoutputsw sysoutputsw =[current] No
set micenable[target] micenable=[current] No
get micenable micenable=[current] No
set speakerenable[target] spkrenable=[current] No
get speakerenable spkrenable=[current] No
set micboostenable[target] micboostenable=[current] No
get micboostenable micboostenable=[current] No
Field Possible Values Description
target volume l +val
l -val
l =-20 to 20
The + or – symbol
increases or
decreases the
volume. If you type a
number between -20
and 20, the volume is
set to that level.
current volume -20 to 20 Sets the volume level
target mute l on
l off
Turns the mute on or
off
current mute l on
l off
Displays mute state
current volumecontrol l on
l off
Displays volume
control
target volumecontrol l =on
l =off
Displays if volume
control is on or off
current micvolume l 0 to 40 Displays current
microphone volume
C H AP T ER 8
Connecting your room controlsystem toyour interactive projector
68