Filter
Top Products
12 | CHAPTER 2 – CONFIGURING YOUR HUB
OR
Select the Manually specify network settings and addresses option to
configure networking settings manually, and then type the appropriate information
(as supplied by your network administrator) in the :
– IP address
– Subnet mask
– Default gateway
– DNS server 1
– DNS server 2
4. Press Apply All.
TIP
You can reset your unit to ensure your settings are applied.
To configure e-mail
(SMTP) settings
1. Select System > Settings.
The Settings dialog box appears.
2. If you have a SMART Hub SE240, select Network and Conference, and then
press E-Mail (SMTP).
OR
If you have a SMART Hub VE220, select Network, and then press
E-Mail (SMTP).
3. Type the name of your SMTP server in the SMTP server name box, and then type
the port number of your SMTP server in the Port number box.
NOTE
The SMTP’s default port number is 25.
4. Type the domain name of the SMTP server in the Domain name box.
NOTES
– Select the Enable file export by e-mail check box to enable file
export by e-mail.
– Select the Enable RJ45 Ethernet port check box to enable the
networking features on the Administration tab.
5. Press Apply All.