Filter
Top Products
20 | CHAPTER 2 – CONFIGURING YOUR HUB
Power State Commands
Input Selection Commands
Command Description
on Turns on the SMART Hub SE240.
off Turns off the SMART Hub SE240 (only with a projector).
get powerstate Requests the SMART Hub SE240 power state.
Possible returned values when using your hub with a
SMART UF55, SMART UF55w, UX60 or Unifi™ projector:
•startup
•on
• shutdown
•off
Possible returned values when not using your hub with a
SMART UF55, SMART UF55w, UX60 or Unifi projector:
•on
• standby
Command Description
set input dvi-1 Selects the first computer input.
set input dvi-2 Selects the second computer input.
set input composite Selects the composite video source input.
set input s-video Selects the S-video source input.
set input whiteboard Selects Whiteboard.
get input Requests the hub’s current input.