Filter
Top Products
15 | CHAPTER 2 – CONFIGURING YOUR HUB
Configuring SMART Bridgit Software
To configure SMART
Bridgit software
1. Select System > Settings.
The SMART Hub SE240 Settings dialog box appears.
2. Press Network and Conference, and then press the Conferencing tab.
3. Select the Enable conferences with Bridgit software check box.
4. In the Bridgit server box, type the URL of the SMART Bridgit server (for example,
bridgit.yourcompany.com).
5. In the Default meeting box, type a default, easy-to-identify name for all SMART
Bridgit meetings created with your hub.
6. In the Viewing Password box, type a that participants must enter to view SMART
Bridgit meetings.
7. In the Creation Password box, type a password that participants must enter to
create SMART Bridgit meetings, and then press Apply All.
Creating a SMART Bridgit Meeting
IMPORTANT
• This section applies to the SMART Hub SE240 only.
• You must connect your hub to a network and configure it to use SMART
Bridgit software.
SMART Bridgit meetings start automatically once you configure SMART Bridgit.
TIP
For more information on SMART Bridgit, see the SMART Bridgit 4.0 Software
User’s Guide (document 142511
).
To change the meeting’s
name and
Select System > Change Meeting Name and Password to change the meeting’s
name and .
NOTE
If you’re a meeting owner, you also have the option of removing current attendees
from the meeting.