![](http://pdfasset.owneriq.net/e/d9/ed979461-5b91-43fc-966f-e7f43358b09d/ed979461-5b91-43fc-966f-e7f43358b09d-bgb4.png)
C
ONFIGURING
THE
S
WITCH
3-116
Web – Configure the mask to match the required rules in the MAC ingress
or egress ACLs. Set the mask to check for any source or destination
address, a host address, or an address range. Use a bitmask to search for
specific VLAN ID(s) or Ethernet type(s). Or check for rules where a
packet format was specified. Then click Add.
Figure 3-51 ACL Mask Configuration - MAC