Filter
Top Products
C
OMMAND
G
ROUPS
4-13
The access mode shown in the following tables is indicated by these
abbreviations:
NE (Normal Exec)
PE (Privileged Exec)
GC (Global Configuration)
LC (Line Configuration)
IC (Interface Configuration)
VC (VLAN Database Configuration)
MST (Multiple Spanning Tree)
ACL (Access Control List Configuration)
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
4-216
Spanning Tree Configures Spanning Tree settings for the switch 4-221
VLANs Configures VLAN settings, and defines port
membership for VLAN groups; also enables or
configures private VLANs and protocol VLANs
4-245
GVRP and
Bridge Extension
Configures GVRP settings that permit automatic VLAN
learning; shows the configuration for the bridge
extension MIB
4-264
Priority Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight for each
priority queue, also sets priority for TCP/UDP traffic
types, IP precedence, and DSCP
4-269
Quality of Service Configures Differentiated Services 4-284
Multicast Filtering Configures IGMP multicast filtering, query parameters,
and specifies ports attached to a multicast router
4-296
IP Interface Configures IP address for the switch interfaces; also
configures ARP parameters and static entries
4-307
IP Routing Configures static and dynamic unicast routing 4-317
Router
Redundancy
Configures router redundancy to create primary and
backup routers
4-381
Table 4-4 Command Group Index (Continued)
Command Group Description Page