SMC Networks SMC8724ML3 Switch User Manual


 
C
ONFIGURING
THE
S
WITCH
3-262
CLI – This example creates VRRP group 1, sets this switch as the master
virtual router by assigning the primary interface address for the selected
VLAN to the virtual IP address. It then adds a secondary IP address to the
VRRP group, sets all of the other VRRP parameters, and then displays the
configured settings.
Displaying VRRP Global Statistics
The VRRP Global Statistics page displays counters for errors found in
VRRP protocol packets.
Field Attributes
VRRP Packets with Invalid Checksum – The total number of VRRP
packets received with an invalid VRRP checksum value.
VRRP Packets with Unknown Error – The total number of VRRP
packets received with an unknown or unsupported version number.
VRRP Packets with Invalid VRID – The total number of VRRP
packets received with an invalid VRID for this virtual router.
Console(config)#interface vlan 1 4-249
Console(config-if)#vrrp 1 ip 192.168.1.6 4-382
Console(config-if)#vrrp 1 ip 192.168.2.6 secondary
Console(config-if)#vrrp 1 timers advertise 5 4-385
Console(config-if)#vrrp 1 preempt delay 10 4-386
Console(config-if)#vrrp 1 priority 1 4-384
Console(config-if)#vrrp 1 authentication bluebird 4-383
Console(config-if)#end
Console#show vrrp 4-387
Vlan 1 - Group 1,
state Master
Virtual IP address 192.168.1.6
Virtual MAC address 00-00-5E-00-01-01
Advertisement interval 5 sec
Preemption enabled
Min delay 10 sec
Priority 1
Authentication SimpleText
Authentication key bluebird
Master Router 192.168.1.6
Master priority 255
Master Advertisement interval 5 sec
Master down interval 15
Console#