Sony MX-C400P All in One Printer User Manual


 
3-35
SYSTEM SETTINGS
WEB PAGE (GENERAL)
Default Settings
The default settings for operation of the machine can be configured. Select [System Settings] - [Default Settings] from the
menu bar and configure each setting.
Clock Adjust
Use this to set the date and time in the machine's built-in clock.
Set the time.
Daylight Saving Time Setting
Enable daylight saving time.
Date Format
The format used to print the date on lists and other output can be changed.
Item Settings
Current Date & Time The current time set in the machine appears.
Specify Time Zone
If your region is ahead of GMT (Greenwich Mean Time), select [+]. If your region is
behind GMT, select [-]. Next, specify the time difference between your region and
GMT in hours and minutes.
Date & Time Settings Select and set the year, month, day, hour, and minute.
Synchronize with Internet Time Server
This can be used when the machine is connected to the Internet. The machine's time
is automatically adjusted to the time of an Internet time server.
Item Settings
Daylight Saving Time Setting
Select whether or not the Daylight Saving Time Setting is enabled. If disabled, the
following settings will not be possible.
Select Setting Type
Specify whether the starting and ending day of daylight saving time are to be set
using the day of the week or the date.
Start Time
Set the starting time of daylight saving time. Set the starting month. If you selected "Day
of the Week" in "Select Setting Type", set the starting week of daylight saving time and
then the starting day. If you selected "Date" in "Select Setting Type", set the starting date.
Set the hour and minute and the UTC (Coordinated Universal Time) setting.
Completing Time
Set the ending time of daylight saving time in the same way as you set the starting time.
Adjustment Time Set the time that adjustment will take place when daylight saving time begins.
Item Settings
Current Setting The current time appears in the format set in the date format settings.
Format Set the order of display of the year, month, and day (YYYY/MM/DD).
Separator Select one of three symbols or a blank space for the separator used in the date.
Day-Name Position Select whether the day name appears before or after the date.
Time Display Select 12-hour format or 24-hour format for the time.
12-Hour Display: 12:00AM to 11:59AM/12:00 to 11:59PM
24-Hour Display: 00:00 to 23:59
If "Disabling of Clock Adjustment" (page 3-52) has been enabled in the system settings (administrator), the date and time
cannot be set.