Filter
Top Products
CLIE Operating Instructions
Customizing your CLIÉ handheld
114
nN
Adding detailed information to a service template
If you are using one of the predefined service templates, you probably only need to enter your user name
and telephone number. If you are creating a new service template, you may need to provide additional
information to your ISP or dial-in server. Use the Details dialog box to add additional information to a
selected service template.
To select a connection type, proceed as follows:
1 In the Network Preferences screen, tap the service field.
2 Tap Details.
The Details screen is displayed.
3 Tap the down arrow next to Connection type and select one of the following connection types:
PPP: Point-to-Point protocol
SLIP: Serial Line Internet Protocol
CSLIP: Compressed Serial Line Internet Protocol
4 Tap the down arrow next to Idle timeout and select one of the following options:
1 minute: Waits one minute for you to open another application before it drops the connection.
2 minutes: Waits two minutes.
3 minutes: Waits three minutes.
Never: Keeps your PPP or SLIP connection until you turn off your CLIÉ handheld (or until it times out).
Note that this option will be more costly than others.
5 Tap the Query DNS check box to deselect it.
6 Enter the IP address for the Primary and Secondary DNS (Domain Naming System). Ask your Internet
Service Provider or System Administrator for the correct Primary or Secondary DNS IP numbers.