Filter
Top Products
CLIE Operating Instructions
Customizing your CLIÉ handheld
115
nN
7 If you need to enter the CLIÉ handheld's IP Address, tap the IP Address check box to deselect it and
display a permanent IP address field below the check box. Normally, you do not have to enter this. If you
are not sure, select Automatic and go to step 10.
8 Enter the CLIÉ handheld's IP Address.
9 Tap OK.
If you are not sure which connection type to choose, try PPP; if that doesn’t work, ask your Internet Service Provider or your System Administrator for
the correct connection type.
Creating a log in script
A log in script is a series of commands that automates logging in to a network server, for example, your
corporate network or your Internet Service Provider (ISP). It is something that you are likely to receive from
your IS System Administrator, if your company has a system in which you log in to the corporate servers from
your CLIÉ handheld using a modem or network connection.
To create a log in script, proceed as follows:
1 In the Network Preferences screen, tap the Service field.
2 Tap Details.
The Details screen is displayed.
3 Tap Script.
The Log in Script screen is displayed.
4 Tap the down arrow next to End and select one of the following commands. If the command requires
additional information, a field appears to the right of it for you to enter the information.
Wait For: Tells your CLIÉ handheld to wait for specific characters from the TCP/IP server before
executing the next command.