Filter
Top Products
CLIE Operating Instructions
Using your CLIÉ handheld
84
nN
4 Tap Network.
5 Tap OK.
The HotSync screen appears again.
6 Tap Modem and then select Service.
The Preferences screen is displayed.
7 Tap the arrow next to Service and then select a service from the drop-down list.
8 Tap Done.
9 Tap the Menu icon.
10 Tap Options, and then tap Conduit Setup.
When connecting to a network computer with a cable
To connect to the network computer via a cable, proceed as follows:
1 Rotate the Jog Dial™ to select HotSync and then press the Jog Dial™.
Or tap the HotSync
®
icon on the Application Launcher screen.
The HotSync screen appears.
2 Tap the Menu icon.
3 Tap LAN Sync Prefs from the Options menu.
The LANSync Preferences screen is displayed.
4 Tap LANSync.
5 Tap OK.
The HotSync screen appears again.
6 Tap the Menu icon.
7 Tap Conduit Setup from the Options menu.
8 Perform a local HotSync
®
operation.
Follow the instructions in Performing a local HotSync® (page 74).