Filter
Top Products
CLIE Operating Instructions
Getting help
126
nN
I want to synchronize my computer with more than one CLIÉ handheld
If the computer running the Palm™ Desktop for CLIÉ software synchronizes with more than one CLIÉ
handheld, each handheld must have a unique name. Assign a user name to your CLIÉ handheld the first
time you perform a HotSync
®
operation.
Please be aware that synchronizing more than one CLIÉ handheld with the same user name causes
unpredictable results and, potentially, loss of your personal information.
Beaming problems
I cannot beam data to another Palm™ OS PDA
Confirm that your CLIÉ handheld and the other Palm™ OS PDA are between ten centimeters
(approximately 4”) and twenty centimeters (approximately 8”) apart, and that the path between the
two handhelds is clear of obstacles. Beaming distance to other Palm™ OS PDAs may be different.
Move your CLIÉ handheld closer to the receiving handheld.
During beaming, I get a message telling me the handheld is out of memory
Your CLIÉ handheld requires at least twice the amount of memory available as the data you are receiving.
For example, if you are receiving a 30K application, you must have at least 60K free.
Perform a soft reset.
Recharging problems
When I place my CLIÉ handheld in the cradle, it does not recharge
Confirm that your CLIÉ handheld is well seated in the cradle.
Confirm that your recharger is plugged into an AC outlet that has power.
Confirm that you are using the cradle and AC adapter that came with the device.
Make sure your CLIÉ handheld is turned off or it will not fully charge.