Filter
Top Products
CLIE Operating Instructions
Using your CLIÉ handheld
83
nN
5 Place your CLIÉ handheld in the cradle and perform a HotSync
®
operation.
The HotSync
®
operation records network information about your computer on your CLIÉ handheld. With
this information, your CLIÉ handheld can locate your computer when you perform a HotSync
®
operation
via the network.
To check if your computer‘s network information (Primary PC name and Primary PC address) is entered on
your CLIÉ handheld, proceed as follows:
1 Rotate the Jog Dial™ to select HotSync and then press the Jog Dial™. Or tap the HotSync
®
icon on the
Application Launcher screen.
The HotSync screen appears.
2 Tap the Menu icon.
3 Tap Primary PC Setup from the Options menu.
The Primary PC Setup screen is displayed.
4 On your computer, click the HotSync
®
icon in the Windows
®
task tray and then select Setup from the
shortcut menu.
5 Click the Network tab, then click TCP/IP Settings to open the TCP/IP Settings screen.
6 Confirm that the Primary PC name and Primary PC address on both screens displayed in step 3 and 5
match. If they do not, change the Primary PC name and Primary PC address entered in your CLIÉ
handheld, then tap OK.
7 On your computer, tap OK to close the TCP/IP Settings screen and the Setup screen.
To prepare your CLIÉ handheld, proceed as follows:
1 Rotate the Jog Dial™ to select HotSync and then press the Jog Dial™. Or tap the HotSync
®
icon on
the Application Launcher screen.
The HotSync screen appears.
2 Tap the Menu icon.
3 Tap Options, and then tap Modem Sync Prefs.
The Modem Sync Preferences screen is displayed.