Filter
Top Products
CLIE Operating Instructions
Using your CLIÉ handheld
79
nN
Transferring a created profile
To transfer a created profile, proceed as follows:
1 Place a CLIÉ handheld without a user name in the cradle.
2 Press the HotSync
®
button on the cradle.
The Users dialog box appears.
3 Click Profiles.
The Profiles dialog box appears.
4 Select the profile you want to transfer to your CLIÉ handheld, and then click OK.
5 Click Yes.
The selected profile is transferred to your CLIÉ handheld. The next time you perform a HotSync
®
operation, the Palm™
Desktop for CLIÉ software shows a dialog box where you can specify a user name
for your CLIÉ handheld.
Conducting an infrared HotSync
®
operation
You can use the IR (infrared) port of your CLIÉ handheld to perform an IR HotSync
®
operation with a
computer equipped with an IrDA (Infrared Data Association) IR port. An IR HotSync
®
operation allows you
to perform a HotSync
®
operation without using the cradle.
Before you start performing an IR HotSync
®
operation
Check the following:
Your computer’s operating system is not Windows
®
2000 (you cannot perform an IR HotSync
®
operation
with a computer running the Windows
®
2000 operating system.)
Your computer is equipped with an infrared port supporting the IrDA standards.
The infrared port of your computer is enabled for Windows
®
use. To enable the IR port with Windows
®
,
see the manual of the computer you are using or the Windows
®
online help.