Filter
Top Products
Rev. 0.00
3-94
STARLIneModeCommandSpecications
ESC * r E n NUL
[Name] Set raster EOT mode
[Code] ASCII ESC * r E n NUL
Hexadecimal 1B 2A 72 45 n 00
Decimal 27 42 114 69 n 0
[DenedArea] Thermal : n = 0, 1, 2, 3, 8, 9, 12, 13
Slip : -
Validation : -
[Initial Value] Thermal : n = 13
Slip : -
Validation : -
[Function]
<Thermal>
Set raster EOT mode
The EOT mode operates to execute using the raster document quit command ESC FF EOT.
n is a decimal description (max. 255 digits) using ASCII characters.
EOT mode setting format
n Form Feed Cut Feed Cutter
0 Set To Default Set To Default Set To Default
1
○(*1) -- --
2
○(*1) ○ --
3
○(*1) Tear Bar --
8
○(*1) -- Full Cut
9
○(*1) ○ Full Cut
12
○(*1) -- Partial Cut
13
○(*1) ○ Partial Cut
(*1) Form Feed
When the printer is a model handling BM and is set for BM to be effective, the set raster mode page
length is ignored and BM detecting is performed.
<Slip>,<Validation>
Use prohibited.