Star Micronics Line Thermal/Dot Printer Printer User Manual


  Open as PDF
of 209
 
Rev. 0.00
3-62
STARLIneModeCommandSpecications
BEL
[Name] External device 1 drive instruction
[Code] ASCII BEL
Hexadecimal 07
Decimal 7
[DenedArea] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function] Executes the external device drive conditions set according to the command to set the external drive
device pulse width (ESC BEL n1 n2).
As with other commands, it temporarily stores data in the data buffer, then executes in the order re-
ceived.
(Note) External device 1 and external device 2 cannot be executed simultaneously.
FS
[Name] External device 1 drive instruction
[Code] ASCII FS
Hexadecimal 1C
Decimal 28
[DenedArea] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function] Executes the external device drive conditions set according to the command to set the external drive
device pulse width (ESC BEL n1 n2).
As with other commands, it temporarily stores data in the data buffer, then executes in the order re-
ceived.
(Note) External device 1 and external device 2 cannot be executed simultaneously.
 previous next