Star Micronics Line Thermal/Dot Printer Printer User Manual


  Open as PDF
of 209
 
Rev. 0.00
3-144
STARLIneModeCommandSpecications
ESC GS y S 2 n
[Name] Set QR code cell size
[Code] ASCII ESC GS y S 2 n
Hexadecimal 1B 1D 79 53 32 n
Decimal 27 29 121 83 50 n
[DenedArea] Thermal : 1 ≤ n ≤ 8
Slip : -
Validation : -
[Initial Value] Thermal : n = 3
Slip : -
Validation : -
[Function]
<Thermal>
Sets the cell size.
• Parameter details
• n: Cell size (Units: Dots)
• Specification using this command is recommended to be 3 ≤ n.
To use with n = 1 and 2, confirm by actual use.
<Slip>,<Validation>
Only setting is valid
Setting is valid after switching to thermal.
 previous next