Star Micronics Line Thermal/Dot Printer Printer User Manual


  Open as PDF
of 209
 
Rev. 0.00
3-27
STARLineModeCommandSpecications
ESC z n
[Name] Select line feed amount
[Code] ASCII ESC z n
Hexadecimal 1B 7A n
Decimal 27 122 n
[DenedArea] Thermal : n = 1, 49
Slip : n = 0, 1, n = 48, 49
Validation : n = 0, 1, n = 48, 49
[Initial Value] Thermal : Memory switch setting
Slip : 1/6 inch
Validation : 1/6 inch
[Function]
<Thermal> Specifiesthelinefeedamount.
n Amount of Line Feed
1, 49
Species4mmlinefeedamount
<Slip>,<Validation>
Specifies the line feed amount.
n Amount of Line Feed
0, 48
Species1/12inchlinefeedamount
1, 49 Species1/6inchlinefeedamount
Line feed amounts can be set independently for both line mode and page mode.
ESC 0
[Name] (Thermal) Specify 3 mm line feed amount/(Slip) specify 1/8 line feed amount
[Code] ASCII ESC 0
Hexadecimal 1B 30
Decimal 27 48
[DenedArea] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : Memory switch setting
Slip : 1/6 inch
Validation : 1/6 inch
[Function]
<Thermal> Specifiesthelinefeedamountto3mm.
<Slip>,<Validation>
Specifies the line feed amount to 1/8 inch.
Line feed amounts can be set independently for both line mode and page mode.
 previous next