Filter
Top Products
Rev. 0.00
3-42
STARLIneModeCommandSpecications
ESC GS a n
[Name] Specify position alignment
[Code] ASCII ESC GS a n
Hexadecimal 1B 1D 61 n
Decimal 27 29 97 n
[DenedArea] Thermal : 0 ≤ n ≤ 2, 48 ≤ n ≤ 50, (“0” ≤ n ≤ “2”)
Slip :
0 ≤ n ≤ 2, 48 ≤ n ≤ 50, (“0” ≤ n ≤ “2”)
Validation :
0 ≤ n ≤ 2, 48 ≤ n ≤ 50, (“0” ≤ n ≤ “2”)
[Initial Value] Thermal : n = 0
Slip : n = 0
Validation : n = 0
[Function] This specifies position alignment for all print data in one line, in the set print region.
n Position alignment
0, 48 Left alignment
1, 49 Center alignment
2, 50 Right alignment
<Slip>,<Validation>
When page mode is selected, only setting is valid
Setting is valid after switching to line mode.
(Note) The settings by this command are valid for all stations.
ABC
ABCD
<ESC><GS> ” a” 0
ABCDE
ABC
<ESC><GS> “a” 1
ABCD
ABCDE
ABC
<ESC><GS> “ a” 2
ABCD
ABCDE