Star Micronics Line Thermal/Dot Printer Printer User Manual


  Open as PDF
of 209
 
Rev. 0.00
3-152
STARLIneModeCommandSpecications
ESC VT m n
[Name] Sets slip paper discharge direction and discharge length
[Code] ASCII ESC VT m n
Hexadecimal 1B 0B m n
Decimal 27 11 m n
[DenedArea] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function] Four bytes ignored
ESC EM n m LF NUL
[Name] Set slip/validation automatic clamp
[Code] ASCII ESC EM n M LF NUL
Hexadecimal 1B 19 n M 0A 00
Decimal 27 25 n M 10 0
[DenedArea] Thermal : -
Slip :
0 ≤ n ≤ 255
m = 0, 1, 48, 49
Validation :
0 ≤ n ≤ 255
m = 2, 3, 50, 51
[Initial Value] Thermal : -
Slip : n: MSW Setting
m = 0
Validation : n: MSW Setting
m = 0
[Function]
m Function
0, 1, 48, 49 Sets the waiting time from inserting slip paper until the start of execution of automatic clamp
according to n.
n is the same as the MSW slip opening time setting (for details refer to the MSW settings for
each printer).
2, 3, 50, 51 Sets the waiting time from inserting validation paper until the start of execution of automatic
clamp according to n.
n is the same as the MSW validation opening time setting (for details refer to the MSW
settings for each printer).
<Thermal> Onlysettingisvalid.Settingisvalidafterswitchingtosliporvalidation.
 previous next