Filter
Top Products
Rev. 0.00
3-59
STARLineModeCommandSpecications
• n3: Bar Code Mode Selection
n3 Bar Codes Types
UPC-E, UPC-A, JAN/EAN8 Code39, NW-7 ITF
JAN/EAN13, Code128, Code93
1, 49 Minimum module 2 dots Narrow : Wide = 2: 6 dots Narrow : Wide = 2: 5 dots
2, 50 Minimum module 3 dots Narrow : Wide = 3: 9 dots Narrow : Wide = 4:10 dots
3, 51 Minimum module 4 dots Narrow : Wide = 4:12 dots Narrow : Wide = 6:15 dots
4, 52 --- Narrow : Wide = 2: 5 dots Narrow : Wide = 2: 4 dots
5, 53 --- Narrow : Wide = 3: 8 dots Narrow : Wide = 4: 8 dots
6, 54 --- Narrow : Wide = 4:10 dots Narrow : Wide = 6:12 dots
7, 55 --- Narrow : Wide = 2: 4 dots Narrow : Wide = 2: 6 dots
8, 56 --- Narrow : Wide = 3: 6 dots Narrow : Wide = 3: 9 dots
9, 57 --- Narrow : Wide = 4: 8 dots Narrow : Wide = 4:12 dots
• n4: Bar code height (dot count)
Spec. 1: When the height of the bar code is more than the form feed amount, the form feed amount
is automatically doubled.
Spec. 2: Line feed according to (bar code height + under-bar characters)
• k (bar code data count), d (bar code data)
Bar Codes Types Denedareaofk Denedareaofd
UPC-E 11 ≤ k ≤ 12 48 ≤ d ≤ 57 (“0” ≤ d ≤ “9”)
UPC-A
11 ≤ k ≤ 12 48 ≤ d ≤ 57 (“0” ≤ d ≤ “9”)
JAN/EAN8
7 ≤ k ≤ 8 48 ≤ d ≤ 57 (“0” ≤ d ≤ “9”)
JAN/EAN13
12 ≤ k ≤ 13 48 ≤ d ≤ 57 (“0” ≤ d ≤ “9”)
Code39
1 ≤ k 48 ≤ d ≤ 57 (“0” ≤ d ≤ “9”), 65 ≤ d ≤ 90 (“A” ≤ d ≤ “Z”)
32, 36, 37, 43, 45, 46, 47(SP, “$”, “%”, “+”, “-”, “.”, “/”)
ITF
1 ≤ k
For odd numbers
0 data is automatically added
to the top.
48 ≤ d ≤ 57 (“0” ≤ d ≤ “9”)
Code128
1 ≤ k 0 ≤ d ≤ 127
Code93
1 ≤ k 0 ≤ d ≤ 127
NW-7
1 ≤ k 48 ≤ d ≤ 57 (“0” ≤ d ≤ “9”), 65 ≤ d ≤ 68 (“A” ≤ d ≤ “D”)
36, 43, 45, 46, 47, 58 (“$”, “+”, “-”, “.”, “/”, “:”)
97, 98, 99, 100 (“a,” “b,” “c,” “d”)
• UPC-E: k = 11 (or 12)
The 12
th
check digit is automatically applied, so it is ignored even if specified.
Command is ignored if the data cannot be shortened. Data conversion to rectangles is automatic.
• UPC-A: k = 11 (or 12)
The 12
th
check digit is automatically applied, so it is ignored even if specified.
• JAN/EAN -8: k = 7 (or 8)
The 8
th
check digit is automatically applied, so it is ignored even if specified.
• JAN/EAN -13: k = 12 (or 13)
The 13
th
check digit cannot be automatically applied, so it is ignored even if specified.
• CODE39: k is freely set, and maximum value differs according to the mode.
Start and stop codes (*) are automatically included.
• ITF: k is freely set, and maximum value differs according to the mode.
If the data is an odd line, 0 data is automatically appended to the top.
• CODE128: k is freely set, and maximum value differs according to the mode and print character
type.
Check character is automatically appended.
• CODE93: k is freely set, and maximum value differs according to the mode and print character
type.
Thestart/stopcode(□)isautomaticallyappended.
• NW7: k is freely set, and maximum value differs according to the mode and print character type.
Both start/stop codes are included in the data (but not automatically applied).