Star Micronics Line Thermal/Dot Printer Printer User Manual


  Open as PDF
of 209
 
Rev. 0.00
3-82
STARLIneModeCommandSpecications
3-3-16) Others
RS
[Name] Ring buzzer
[Code] ASCII RS
Hexadecimal 1E
Decimal 30
[DenedArea] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function] Issues a short buzzer sound from the printer.
Execute this command after printing the unprinted data in the line buffer.
CAN
[Name] Cancel print data and initialize commands
[Code] ASCII CAN
Hexadecimal 18
Decimal 24
[DenedArea] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function] When the reception buffer and line buffer are cleared, the set commands are initialized.
Immediately executed not when taking out from the reception buffer, but when received from the
host.
DIPSW re-loading is not performed.
After execution, thermal is selected.
The following shows the specifications that are not initialized by this command.
• Set print density
• Set print speed
• Two Color Printing Mode Setting
• Printing color in 2-color printing mode
• External device drive condition
• Auto status valid/invalid conditions
 previous next