Star Micronics Line Thermal/Dot Printer Printer User Manual


  Open as PDF
of 209
 
Rev. 0.00
3-87
STARLineModeCommandSpecications
ESC # * LF NUL
[Name] Inquire printer version
[Code] ASCII ESC # * LF NUL
Hexadecimal 1B 23 2A 0A 00
Decimal 27 35 42 10 0
[DenedArea] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function]
Sends printer version.
ESC # *, printer version LF NUL
<Ex:ForHSP7000Ver.1.0ESC#*,HSP7000Ver.1.0LFNUL>
ESC ? LF NUL
[Name] Reset printer (execute self print)
[Code] ASCII ESC ? LF NUL
Hexadecimal 1B 3F 0A 00
Decimal 27 63 10 0
[DenedArea] Thermal : -
Slip : -
Validation : -
[Initial Value] Thermal : -
Slip : -
Validation : -
[Function] Hardware resets the printer and executes on self print.
After sending this command, the next data is not sent until the printer is online (in a state wherein it
can receive data).
When resetting the printer, the following processes are performed.
I/F Mode Process
Parallel --- BUSY output
RS-232C DTR mode DTR mark output
Xon/Xoff Mode Xoff output
<Validation> Executesonlyareset;doesnotexecuteaself-print.
 previous next