Filter
Top Products
base unit for line spacing
MODE
ASCII Decimal
Hexadecimal
IBM
<E SC> “ [ “ “ \ “
27 91 92 IB 55 5C
<4>
<c> <o> 400 04 00 00
<O> nl n2
O nl n2 00 nl n2
Sets the base unit for the line spacing commands,
<ESC> “3” and <ESC> “J”, as shown below:
nl
n2 Line spacing unit
o
180
1 / 180
inch
o
2:6
1/216
inch
1
104
1/ 360 i:lc i
T-hiscommand becomes effective only after <ESC> “3” or
<ESC> “J” is received. The default base unit is set to
1/216”.
Set line spacing
MODE
ASCII
Decimal
Hexadecimal
Both
<~ Sc> “ 3,, ;,
27 5: n IB 33 n
Sets the distance the paper advances or reverses in sub-
sequent line feeds to
n/ 180 inch (STD and IBM mode),
n/216 inch or n/360 inch (IBM mode only) according to
the preceding base unit.
The value of n is between Oand 255. If n = O,in Stan-
dard mode the line-feed distance is set to O,but in IBM
mode the command is ignored.
Page 111