Filter
Top Products
Thepaper is jamming, ~
causing the print head to
jam.
Inappropriate margin ~
settings have been selected
from your application
program.
I
printer. Reload paper.
Check the print gap. If
necessary, use the
adjustment lever to set the
print gap. See “Adjusting
the print gap” on page 24.
“Choosed-ifferentrn”argin
settings in your
application.
P
The ribbon cartridge is
Make sure that the ribbon
incorrectly installed,
cartridge is correctly
causing the print head to
installed. See “Installing
jam.
the ribbon cartridge” on
page 10.
The paper is not loaded
Remove all paper from the
properly, causing the print
~printer. Reload paper.
head to jam.
I
The print gap is not set
~Use the adjustment lever to
correctly.
~set the print gap. See
“Adjusting the print gap”
on page 24.
Page